| Type: | Robotic Mowers |
|---|---|
| Moving Way: | Mount Type |
| Cutter Type: | Rotary Lawn Mower |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction for Robot Lawn Mower
The intelligent lawn mower can complete the work of mowing the lawn independently, without direct human control and operation, and has low power, low noise, exquisite and beautiful appearance, and greatly reduces manual operation.Operating instructions of lawn mower
Preparation before starting the remote control mower
(1)Be sure to confirm the tightness of screws of all parts before starting up.
(2)Turn on the machine power key switch, pull back the right control lever and hold it, then press the switch key of the remote controller to turn on the remote controller.
(3)When the remote control is turned on, a "drip" will appear, indicating that the machine matches the remote control normally.
(4)engine start;
a> Release the brake on the right side of the engine (also disconnect the flameout switch);
b> Turn the left throttle counterclockwise to the end (so as to open the engine throttle at the same time);
c> Pull hard on the pull rope of the hand pull plate to start the engine;
d> Adjust the throttle to the proper speed in time after starting the engine;
| Product Weight (lbs)() | 900lbs. | Engine Make() | Loncin() |
| Cutting width() | 48in | Engine Oil Included (Yes/No) ((/)) |
Yes |
| Power() | 27HP | Engine Style (Single Cylinder, V-Twin) ((,V-Twin) |
V-Twin() |
| Engine() | Loncin() | Engine Torque (ft-lbs) ((-)) |
N/A |
| Engine Displacement() | 803cc | Frame Material() | Steel() |
| Gross Torque() | N/A | Front Axle Material() | Steel() |
| Cutting Height() | 1.5" to 5" | Front Wheel Size() | 13 x 5 in. |
| Front Tire Size() | 13 x 5 | Fuel Tank Capacity (gal)(()) | 4 gal |
| Rear Tire Size() | 20 x 8 | Fuel Type() | Gasoline() |
| Deck Material() | 12 Gauge stamped Steel with 7 Gauge reinforced clutch plate (127) |
Grease Fittings Included() | Yes |
| Cutting Styles() | Finish cut () | Hazardous Material() | No |
| Drive() | Dual hydro static drive() | Headlights (Yes/No)((/)) | Yes |
| Cutting Speeds() | Infinitely variable() | Hour Meter (Yes/No)((/)) | Yes |
| Max Cutting Speed() | 10 MPH | Housing Material() | Steel() |
| Battery warranty for parts and labor () |
90 days | Instructions / Assembly Required (Yes/No) (/(/)) |
No |
| Adjustable Height (Yes/No) ((/)) |
Yes | Manual Available() | Yes |
| Adjustable Seat (Yes/No) ((/)) |
Yes | Maximum Cutting Height (in) (()) |
5 in. |
| Bag Kit Included (Yes/No) (take out?) (()(?)) |
Yes | Maximum Forward Speed (mph) (()) |
10 MPH |
| Bagger Capable (Yes/No) ((/) |
Yes | Maximum Reverse Speed (mph) (()) |
6.5 mph |
| Battery Recommended () |
Battery Part# Terminal Part# | Minimum Cutting Height (in) ((in)) |
1.5 in. |
| U1-3AC 171 | Mower Deck Width (in) (()) |
48 in. | |
| 8229728248 | Mulching Avabile (Yes/No) ((/)) |
Yes | |
| U1R-306069 | Number Of Anti-Scalp Wheels () |
2 | |
| Blade Engagement Type (PTO) ((PTO)) |
Manual() | Number of Blades() | 3 |
| Color / Finish(/) | Grey / Orange(/) | Number of boxes shipped to customer () |
1 |
| Commercial Duty (Yes/No)((/)) | No | Number of Cutting Positions () |
8 |
| Commercial Warranty (Yes/No)((/)) | No | Number Of Cylinders() | 2 |
| Cup Holder() | Yes | Number of Handle Position Adjustments () |
N/A |
| Cutting Width (in)((in)) | 48 in. | Number of Seat Positions() | 11 |
| Deck Gauge() | 12-Guage Stamped Steel (12) |
Oil Capacity() | 1.8 qt. |
| Discharge Location() | Side() | Oil Filter Type() | Spin on canister() |
| Engine Displacement (cc)((cc)) | 803cc | Operator Controlled Mow-in-Reverse (Yes/No) ((/)) |
Yes |
| Engine Horsepower (hp)((hp)) | 27hp | Package Contents() | mower and manual() |
| Engine Make() | Loncin() | Package Dimensions() | 90x54x79 |
| Engine Oil Included (Yes/No) ((/)) |
Yes | Palletized() | Yes |
| Engine Style (Single Cylinder, V-Twin) ((,V-Twin) |
V-Twin() | Parts List Available() | Yes |
| Engine Torque (ft-lbs) ((-)) |
N/A | Product Dimensions() | 75 x 54 x 72 |
| Frame Material() | Steel() | Rear Axle Diameter (in)((in)) | 1.2 in. |
| Front Axle Material() | Steel() | Rear Wheel Size() | 20 x 8 in. |
| Front Wheel Size() | 13 x 5 in. | Recommended Oil() | 10W-30 |
| Fuel Tank Capacity (gal)(()) | 4 gal | Recommended Safety Equipment () |
Ear and eye protection, closed toe shoes, long pants(,,) |
| Fuel Type() | Gasoline() | Seat Type() | High back() |
| Grease Fittings Included() | Yes | Single Lever Height Adjustment (Yes/No) ((/)) |
Yes |
| Hazardous Material() | No | Size Of Deck Wheels() | 3 in. |
| Headlights (Yes/No)((/)) | Yes | Speed Control (Single/Variable) ((/)) |
Variable() |
| Hour Meter (Yes/No)((/)) | Yes | Spin-On Oil Filter() | Yes |
| Housing Material() | Steel() | Terrain Type (Flat, Flat w/obstacles, hilly) ((,,)) |
Flat with Obstacles/slope degree (/) |
| Instructions / Assembly Required (Yes/No) (/(/)) |
No | Transmission Type() | Dual hydrostatic() |
| Manual Available() | Yes | Turning Radius (in) ((in)) | 0 in. |
| Maximum Cutting Height (in) (()) |
5 in. | Type Of Lubrication System() | Full pressure() |
| Maximum Forward Speed (mph) (()) |
10 MPH | 40'HQ Loading Quantity (40'HQ) | 56units () |
Shandong hightop machinery co., ltd , established in 1980, is an important and a large construction engineering equipment joint-stock enterprise group, It has several wholly-owned subsidiaries, include Shandong Hightop Machinery Co., Ltd. and China Machinery industrial Co.,ltd. company headquarters is located at Huoju Industrial Park, National High Tech Zone, Jining City, Shandong province of China.
Group's manufacturing area is compromised of 50000 square meters where 2000 people works hard. Its service scope covers critical economic fields such as excavator, road roller, loader machine, backhoe loader, small transport vehicle,etc. CNMC Group got ISO9001 international quality system certification, European Union CE certification, SGS certification and Russian GOST certification.
Nowadays, CNMC products have been exported to more than 177 countries, and win good reputation from our customers, because we always pursue "CNMC FOCUS ON QUALITY"
){kind=link}